Knowing what you genuinely need for home protection can be challenging when so many alternatives are available for your security system. The choice of wired versus wireless cameras is among the most important. Wireless security cameras use Wi-Fi to connect to a network, while hardwired security cameras use a hardwired cable. Wireless security cameras do, however, still need a power supply.

The benefits of wired security cameras will be discussed in this blog post and why they are a fantastic choice for your security setup. We’ll also provide you with some installation advice for your wired cameras.

Reason for Wired Cameras instead of Wireless Cameras

Comparing wireless and wired cameras, there are numerous benefits. Installing and configuring them is simple, and adjusting them is relatively tricky.

You may be asking why you would use a wired camera instead of a wireless one. One drawback of using a wired system is installing wiring at every camera location. Once installed, relocating a wired camera will require alterations to the wiring. Still, a connected system has considerably more advantages than downsides.

The significant benefit of a connected setup is that your cameras won’t go out or experience signal interruptions. They use the wire to convey information, so you have crystal-clear audio and video no matter what signal strength. Wireless cameras are dependent on the Wi-Fi signal and your network. The indication disappears if your router malfunctions. You might not obtain a password in inclement weather.

In terms of security, wired cameras are unquestionably superior because they are less vulnerable to hackers.

Acquiring a Coaxial System

Hiring an expert to handle the design and installation is frequently more efficient when it comes to wired systems. They will make sure you have a dependable and effective system tailored for your property rather than a basic bundled home security system that is different from what you need, thanks to their experience and industry knowledge.

A recording device, weather shields for exterior cameras, and enough cable to wire the house should all be considered when choosing the components you want to use to secure your place.

Make an Implementation Schedule.

It’s essential to decide where to put your cameras and what kind will work best to get the best angles and coverage before purchasing cameras, as wired cameras can be challenging to move. The optimal placement for most cameras is over 10 feet above the ground, clear of impediments.

To figure out where to put the cameras, we suggest drawing a layout of your house and selecting which locations you want to keep an eye on. When working with wired cameras, consider where to install the wiring and whether to get batteries-operated cameras or power sources.

A lot of unnecessary wires that take away from your home’s aesthetic appeal should not be included in your décor. The location of the recording device will also affect how much cable you need, so make sure to plan.

Installing a Hardwired Security System

Ensure that there is sufficient cable to reach the camera positions before starting the installation of a wired security system. A long enough cable is required for each camera to plug into the back of the recording device. Routing the line can be challenging, especially for cameras mounted outside or on the other side of the house.

If you’re doing it yourself, you’ll need assistance feeding the wire and steel fish tape through the holes. Having every cable come together in the garage or attic before providing it to the recording device can be helpful. Additionally, you should identify the wires to remember which camera is connected to which stream.

It is considerably simpler to mount the camera itself. Most cameras include a template that shows you where to drill holes to mount the camera. Create a giant hole in the middle of the area with a spade bit so the cable may pass through. If you need to install batteries for your camera before mounting it, make sure to do so. Fasten the camera to the mount by attaching the cable to it. You should change the angle once the camera is in position.

Link the recorder and cameras together. Verify the functionality of each camera. Ensure the power supply is operating correctly and the wires are firmly attached to the camera and recorder if you aren’t receiving video feed from a camera. Once the cameras are used properly, you may verify that the user interface is turned on.

Three Good Reasons to Have a Pro Install Your Security System

Thugs are becoming more intelligent. An effective home security system is what you want to prevent intruders and other dangers. A qualified business is equipped to fix any weaknesses in your system that could endanger your family. The company can install the necessary features to provide you with peace of mind and monitor your property.

Numerous choices are available. Should you decide to DIY your security system, you’ll need to conduct an extensive study to identify the best parts and choose the optimal location. A seasoned security provider will know how to swiftly and accurately install your equipment and position your cameras.

The state of technology is constantly evolving. Experts in home security are aware of the newest innovations that might provide you with a competitive advantage. You can have a system specifically designed to handle the risks that worry you the most.

Tips for Covering Up Security Camera Wires Inside Your Home

You can use the following security camera wire-hiding ideas if you want the wires to be safe from your current interior design.

Solution 1: One possible solution is to use wire guards to conceal the security camera cable when drilling holes for IP camera wiring, such as when wiring cameras through ceilings. After inserting the line into the guard, you can either hang it from the wall within your house or run it behind your furniture. Thus, there are no visible cables.

Solution 2: paint the cables. You can paint over the wires the same color as the walls and staple them to the corner.

Solution 3: Incorporate security camera cables behind your room’s baseboard.

Solution 4: Using a plastic tube, you may also conceal security camera wires from view and shield them from external harm and dust. This is a workable method of hiding CCTV cables.

An enthusiast do-it-yourselfer shared a YouTube video showing his inside-the-home security camera installation guide. He conceals the cords for the surveillance cameras behind the desk. What a clever thought! Watch the video down below.

FAQ: 

Can Security Camera Wires Be Run Both Far and Long?

That would rely on the network connection range and the security camera’s power supply.

For the most part, voltage drop issues do not arise when running security camera wires beyond 330 feet. CCTV cables should be run within the suggested 250-foot radius to guarantee wireless security cameras have a reliable network connection.

To keep thieves from damaging or stealing exterior cameras, install a security camera wire cage after the wires have been routed outdoors.

Editor’s Advice: If you intend to run security camera cables outside of the advised range, bear the following advice in mind:

• To improve the WiFi signal, install a WiFi extender.

• Make use of power extension wires.

Install security cameras that run on batteries without wires to monitor off-grid areas.

What are Security Camera Power Wire Splicing Techniques?

Cutting security camera wire would be simple with the thorough installation instructions provided below.

Step 1: Cut off half an inch of insulation from the ends of the two insulated wires by splitting them with a knife or cable cutter. Take caution when cutting the cables so as not to harm your fingers.

Step 2: Twist the cables’ exposed copper ends to join them (using wire nuts). Be sure to twist the positive line in the same direction as the negative cable.

Step 3: Splice the two power cables together using the security camera wire connectors. Then, insert the exposed copper wire from the positive conductor at one end of the connection. For the other positive wire and the two negative wires, follow the same procedure.

Remember to check the wire’s capacity for electric current using a security camera gauge to prevent potential circuit burning.

Be aware that incorrect splicing of security camera cables might lead to failures in security cameras. If your security cameras aren’t working, read this page to find workable fixes.

Describe the Types of Security Camera Wires.

Selecting the correct cable type when running wiring for your security cameras may spare you a ton of trouble down the road and help desk calls to rectify issues that never should have arisen.

Cat 5/6 Ethernet cables, Siamese cables, and plug-and-play cables are the three primary types of security camera wires that are typically available.

Cat 5/6 Ethernet cables: these security camera cables use a single line to transfer power and video/image data. The video transmission can go up to 1,500 feet via Cat 5/6 wires. PoE IP cameras provide a more straightforward wire-running solution than conventional hardwired CCTV surveillance cameras. This kind of cable is used for these cameras.

RG59 and 18/2 wires are the two Siamese cables typically used for security camera installations. The type of coaxial wire used to link the cameras and DVR is called an RG59 cable. To transfer power from the power supply to the cameras, two independent 18-gauge wires are called 18/2 wires.

Plug-and-play cables: this security camera wiring includes power and video ports. There are four different data transmission lengths for security camera wires: 25, 50, 100, and 150 feet.

The disadvantage of PnP security camera cables is that, in contrast to the previous two categories, they cannot provide high-quality video and power transmission. The signal data cannot be transmitted over cables farther than 150 feet.

How to Install the Wire Guards for Security Cameras

There are two primary varieties of wire guards for security cameras.

Usually used to prevent the security camera from being tempered, one of the varieties resembles a cage.

The other one is usually shaped like a long strip and is intended to shield the wiring of security cameras from weather-related elements such as rain.

Please follow the instructions below to install the wire guards and safeguard the wiring of your security cameras.

Step 1: Use a rubber ring to tie the cables for the security cameras together.

Step 2: To repair the wire bunch, use the wire guard.

Step 3: Use a few screws to fasten the wire guard.

Can I set up my security cameras?

Yes, you are capable of installing security cameras on your own. Wireless security cameras may be installed without a professional’s help. However, many wired cameras can also be made yourself.

Are cameras for exterior security allowed?

Sure, provided that privacy isn’t compromised. For instance, a security camera pointed in a place where your neighbor expects privacy may be subject to legal repercussions.

Does phony home security work well?

Negative. False security camera suggestions are not made. Your house is too valuable to depend on nonsense. Fairy dust, unicorns, and magic tricks don’t work either.

Which kind of security camera—wired or wireless—is better?

It will be up to you. Consider purchasing wireless cameras if you wish to be wire-free. Install a wired home security camera if you don’t mind cables. Simply consider the advantages and disadvantages before making a choice.

A camera receiver is what?

The digital video recorder (DVR) receives the wireless signal transmitted by the camera using a receiver.

Is it better to use cloud or local storage?

Compared to online storage, local storage is more affordable and safer. Monthly fees will apply to keep video recordings in the cloud. No, storage-capable cameras do. There’s also a chance that someone could obtain your password and see video content.

If Wi-Fi is turned off, do security cameras still function?

Absolutely. By locally storing the video, some security cameras can function even without Wi-Fi.

Is wire required for security cameras?

Wireless connections are feasible, while specific exterior cameras might require wiring.

Do cordless cameras require a power supply?

A power supply is not required for wireless cameras that run on batteries.

How challenging is it to set up security cameras that are wired?

Easy-to-follow installation instructions are typically included with wired security cameras.

How much does wiring a security camera cost?

Installing a camera costs between $125 and $450, labor included.

Which wire kinds are used for security cameras?

Coaxial and Ethernet connections are the two most widely used security camera wires.

I want to run security camera wiring, but how far and for how long?

Generally speaking, the maximum length for security camera wires is 300 feet.

How challenging is it to set up security cameras?

It’s easy to install security cameras. The kind of camera you’re installing, though, will determine how complicated it is. Just adhere to the directions that are supplied in the camera.

Is it necessary to plug in every outdoor security camera?

Not every outdoor security camera is required to be powered by a cable. Some are battery-operated and wireless.

What is the simplest security camera to put outdoors?

Because its base is magnetic, the Google Nest Cam is the most straightforward outdoor camera to install.

Conclusion

This blog post discusses the benefits of wired security cameras over wireless ones for home protection. Wired cameras offer better security as they are less vulnerable to hackers and require less wiring to be installed at each location. However, wired systems require a specialized installation and can be more efficient when designed and installed by an expert. The optimal placement for wired cameras is over 10 feet above the ground, clear of impediments. To install a hardwired security system, ensure sufficient cable is available, drill holes for mounting, and connect the recorder and cameras. Verify the functionality of each camera and power supply before connecting them.

A professional security system is essential to prevent intruders and protect your family. DIY installation requires extensive research and careful selection of parts. Experts in home security can provide a competitive advantage by addressing the latest technological advancements. To cover up security camera wires, use wire guards, paint cables, incorporate cables behind baseboards, or use plastic tubes. CCTV cables should be run within a 250-foot radius for reliable network connection. To install security cameras outside the recommended range, consider WiFi extenders, power extension wires, or battery-powered cameras.

Security camera wires are typically available in three types: Cat 5/6 Ethernet cables, Siamese cables, and plug-and-play cables. Cat 5/6 Ethernet cables transfer power and video data up to 1,500 feet, while RG59 and 18/2 wires transfer power and 18-gauge wires. Plug-and-play cables have four data transmission lengths and can transmit power and video over 25-50 feet. Wire guards are used to protect the wiring. Wireless cameras can be installed without professional help, while wired cameras can be made yourself. Wireless cameras can be wire-free, while wired cameras require a power supply. Installation is easy, and the cost of wiring a security camera ranges from $125 to $450.